DataBay KVME-300 Manuel d'utilisateur

MT-H00404-0C 4x4 HDMI Matrix SwitchUser Manual ◄ V1.1 ► www.databay.uk.com

RS-232 Serial Port Control Method C: Software Control through RS-232 Scan: Push this button will trigger the automatic search over all the av

11 / 15 Close: Release the COM port after scan. Quick Setup Buttons: Provide the fast setup between inputs and outputs of the matrix. “

RS-232 Commands RS-232 transmission Format Baud rate: 9600 Data bit: 8 Parity: None Set Command Command Code Response Description Data Chec

Firmware Update Warning! There could be unexpected consequences resulted from inappropriate firmware update operation. Please do it with caution.

7. Please make sure your PC has direct connection to the RS-232 port of the MATRIX, as shown in the picture (left), that in [Communication Setting]

15 / 15 Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID info

Introduction The 4x4 HDMI Matrix provides the most flexible and cost effective solution in the market to route high definition video sources plus mu

Features z State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability z HDMI 1.3c compliant z HDCP co

Specifications & Package Contents Model Name 4x4 HDMI Matrix Switch Model No. MT-H00404-0C Role of usage True 4x4 matrix HDMI compliance HDMI

Panel Descriptions Front Panel 44 6 5 6 56451 46 5 3 2 1. Power: Power indicator 2. IR: IR receiver 3. Input: Input source indicator 4. HP1

DIP Switch SW1-SW4 for EDID/Audio DIP Switch Position Pin#1 Pin#2 Video Audio Description OFF [©] OFF [©] Up to 1080p Stereo1 Default Mode2 –

SW Main for firmware update (for technical support only) DIP Switch Position Pin#1 Pin#2 Pin#3 Pin#4 Normal Operation Mode6 OFF [©] OFF [©] ON [ª

Hardware Installation MT-H00404-0C 1. Connect all sources to HDMI Inputs on the 4x4 HDMI Matrix 2. Connect all outputs to HDMI devices 3. Connec

Operation and IR Control Source Side Method A: Push Button Push the switch button on the front panel, the source will be sequentially changed. Met